PUBLICATIONS

  1. LINEAR ACTUATOR, SYSTEM  AND CONTROL

  2. NON-CIRCULAR CNC TURNING AND ITS SYSTEM

  3. MECHATRONICS, CNC AND MECHANICAL TECHNOLOGY

  4. GENERAL CNC MACHINE TOOLS AND AUTOMATIC DEVICES

  5. BOOK

Home

    LINEAR ACTUATOR, SYSTEM AND CONTROL

  1. KK Tan, HUixing Zhou and Tong Heng Lee, New Interpolation Method for Quadrature Encoder Signals, IEEE Transactions on Instrument and Measurement, Volume 51, Issue 5, Oct 2002, pp 1073-1079

  2. KK Tan, Tong Heng Lee and Huixing Zhou, Micro-Positioning of Linear Piezoelectric Motors Based on a Learning Nonlinear PID Controller, IEEE/ASME Transactions on Mechatronics, v6, n4, December, 2001, pp428-436

  3. Wang Xiankui, Zhou Huixing, Shi Zhongdong, Bu Fanping, Research on Combined Compensated Driving Linear Servo Unit, Journal of Chinese Mechanical Engineering,Volume 34, No.5 1998, pp34-38

  4. Zhou, Huixing (Tsinghua Univ);   Wang, Xiankui,  Repetitive control based linear servo unit under CIMS environment, Computer Integrated Manufacturing Systems, CIMS, v 4, n 2, 1998, p 42-45, 16, in Chinese

  5. H. Zhou, K.K. Tan, T.H. Lee, Micro-Positioning Of Linear Piezoelectric Motors Based On A Learning Nonlinear PID Controller, Volume: 1, Page 913~919, 39th Conference on Decision and Control, 12 Dec. 2000, Sydney

  6. Zhou Huixing, Wang Xiankui, Wu dan, Repetitive Learning Control and Its Applications in Mechanical Engineering, Chinese Mechanical Engineering, Volume 9, No. 7, 1998, pp60-63(In Chinese)

  7. Liu, Jinling (Tsinghua Univ);   Wang, Xiankui;  Wu, Dan;  Zhou, Huixing;  Qian, Lei, Fuzzy-reasoning based self-tuning control for servo drive in linear motor, Journal of Tsinghua University, v 38, n 2, 1998, p 44-46, 50  Language: Chinese

  8. Zhou Huixing, Wang Xiankui, DSP Based Linear Servo Unit, Manufacturing Technology and Machine Tools, 1997.12(In Chinese);

  9. Huixing Zhou, Brian Henson, A. J. Bell etc., Linear Piezo-actuator and its applications, The 5th International Conference on Frontiers of Designand Manufacturing (ICFDM ’2002), Dalian, China, Vol. 1, pp 16~20, July 2002 (one of the three best papers in the conference)

  10. HX. Zhou, HF Dou, K.K. Tan, T.H. Lee, Computer controlled piezo micromanipulation system for biomedical applications, Preprints 2nd IFAC-CIGR Workshop on Intelligent Control for Agricultural Applications, pp. 174-178, 22-24 August 2001, Bali, Inodnesia

  11. Zhou Huixing, Wang Xiankui, The Optimized Engineering Designing Method For NdFeB Magnetic Circuit, 15th International Conference on Magnet Technology, October 20-24, 1997, Beijing

  12. Wang Xiankui, Zhou Huixing, Liu Jingling, A New Type Of Linear Servo Driving System and Its Applications To Precision Engineering, CIRP International Symposium, Advanced design and manufacture in the global manufacturing era, pp903-907, 1997.8, HongKong

    NON-CIRCULAR CNC TURNING AND ITS SYSTEM

  13. Zhou Huixing, Wang Xiankui, Extracted CNC system, China Mechanical Engineering, v 9, n 5, 1998, p 17-19  Language: Chinese

  14. Zhou Huixing Wang Xiankui et al., Repetitive Control Based High Speed Linear Servo Unit Under CIMS Environment, CIMS-China'96 academic meeting, pp606-610, 1996.8, Hairpin(In Chinese);

  15. Zhou Huixing Wang Xiankui et al., High Speed CNC Turning for Irregular Engine Pistons, See: Hai Jintao et al., Advanced Manufacturing Technology, Press of Mechanical Industrial, pp880-884, 1996.9, Beijing; Also in: Machine-Building Industry Automation, May 1998(In Chinese)

  16. Huixing Zhou, Linna Zhang, Xiankui Wang, Jinling Liu, Repetitive Control and Its Application to Linear Servo Unit for CNC Machining of Elliptical Pistons, IEEE International Conference on Industrial Technology, IEEE ICIT'96, pp630-634, 1996.12, Shanghai

  17. Huixing Zhou, Xiankui Wang , Jingrong Zhang, Repetitive Control and Its Application to Precision Machining of Elliptical Pistons, Proceedings of the International Conference on Precision Engineering and the 6th Sino-Japan Joint Seminar on Ultraprecision Technology, pp411-415, 23-25 Sep.1996, Shenyang China(In Chinese)

    BACK TO TOP

    MECHATRONICS, CNC AND MECHANICAL TECHNOLOGY

  18. Zhou Huixing, Wang Xiankui et al., Cutting-Tool Point Measurement and Machining Programming For CNC Piston Turning Machine, Machinery Manufacturing Engineer, 97.7, pp21~22(In Chinese)

  19. Liu Jinling, Wang Xiankui, Zhou Huixing, etc., Inverse Function Adjustment for Nonlinear Measurement System for Pistons, Seventh Proceedings of Association of Manufacturing Automation of Chinese Universities and Colleges, 1996, pp359~362(In Chinese)

  20. Li Xinsheng, Zhang Lingna, Zhou Huixing, On Research and Design of SCARA Robots Using Intelligent Drivers, Annual Report of National Laboratory of Advanced Robot on Mechanism, Vol.1,1992, pp36~42(In Chinese)

  21. Zhou Huixing, A New Kind of Automatic Tool Carrier, Machinery and Electronics, Feb.1991(In Chinese)

  22. Zhou Huixing, Automatic Tool Carrier for CNC lathe, Manufacturing Engineer, Jan.1990, pp14~16(In Chinese)

  23. Zhou Huixing, The Stepper-motor System and Its Applications, Machinery Technology, 1988-1989 (published in six serials)(In Chinese)

  24. Zhou Huixing, The Design and Construction of Automatic Tool Carrier with Precise End Teeth Positioning Disk, Machinery Technology, Mar.1988, pp13~17(In Chinese)

  25. Zhou Huixing, Mechatronical technology and the applications of stepping motor driving system, Proceedings of Mechatronis and Its Application, Sponsored by Xian Jiaotong University, 1988

  26. Zhou Huixing, Force Controllable Automatic Rear-carrier for CNC Machine Tools, Machine Manufacturing, Mar.1987, pp16~18(In Chinese)

  27. Zhou Huixing, Li xinsheng, The Modal Structures of the Economic CNC Lathe, Machinery and Electronics, Jan.1987, pp16~20(In Chinese

    BACK TO TOP

    GENERAL CNC MACHINE TOOLS AND OTHER AUTOMATIC DEVICES

  28. Zhou Huixing, Research on Three Dimensional CNC Drilling Machine Tool, New Technology & New Processing, Aug. 1994, pp16~19(In Chinese)

  29. Zhou Huixing, The New CNC Drilling Processing with Three Feeding Speeds, Machinery Manufacturing Engineer, Jul.1994, pp36~39(In Chinese)

  30. Zhou Huixing, The Stepper-motor System and Its Applications, Machinery Technology, 1988-1989 (published in six serials, In Chinese)

  31. Zhou Huixing, The Economical CNC Lathe and Its Applications, Machine Manufacturing, Nov.1987, pp1~5(In Chinese)

  32. Li Xinsheng, Zhou Huixing, etc.. The Adaptability of Stepping Motor System to the CNC Retrofit of General Type Lathe, Machine-Building Industry Automation, Jan.1987, pp14~20(In Chinese

    BOOK

  33. Mechtronical Control Engineering, Coeditor, Published by Press of Dalian University of Science and Technology, 1994.12(In Chinese)

    BACK TO TOP

HOME PAGE

 RESUME PAGE